Salt battery storage systems for at home
with 9 kWh or 18 kWh
When do you need electricity the most? Sure, in the morning when you get up and then again in the evening when everyone is back in the house. But your photovoltaic system only produces during the day - when you need less electricity. So you feed diligently into the grid. And when you need electricity, you have to buy it again. But what if you could now store your electricity all to yourself, available at any time? You and your house would be independent!
innovenergy® offers you ecologically harmless salt-based home storage for your PV system:
- 9 kVA (3 x 3 kVA) Inverter power (400 V)
- 9 kWh storage capacity (salidomo® 9) – can be expanded to 18 kWh at any time with a simple plug-in unit (salidomo® 18)
- Maximising your own consumption through intelligent control
- Monitoring the power situation and and energy analysis via smartphone app or internet browser
- plug & store – turnkey solution with easy installation
salidomo® – the ECO storage
salidomo® 18 exterior view
salidomo® 18 interior view
salidomo® 18 interior view inverter side
salidomo® 9/18 front view
salidomo® LED function display
salidomo® 18 salt batteries
salidomo® inverters
salidomo® controller
salidomo® DC distribution
salidomo® terminal strip AC connection
salidomo® control connections
salidomo® hibernation hole closed and open
salidomo® front plate screw connection
salidomo® spacer rear side
The salidomo® is an AC-coupled salt battery storage system that works with all PV inverters. The installed battery inverter capacity is 9 kVA. DC coupling of the photovoltaic system via our MPPTs is also possible. Our sales partners will be happy to advise you.
The battery storage capacity for the two salidomo® is as follows:
- salidomo® 9 = 9.4 kWh
- salidomo® 18 = 18.8 kWh
Up to 80 % usable in normal operation, up to 100 % in emergency power operation.
Requirements
| salidomo® 9 | salidomo® 18 | |||
| Installed photovoltaic system | 7 - 10 kWp | 9 - 20 kWp | ||
System characteristics
| salidomo® 9 | salidomo® 18 | |||
| Type of system | All-in-one system | |||
| AC phases | 3-phase system (asymmetrical operation) | |||
| Requirements installation site | dry, indoor and outdoor | |||
| Fire and personal protection requirements | usual personal protection, no fire protection measures necessary | |||
| Extension of battery capacity | at any time, old + new batteries can be combined | |||
| AC installation effort | approx. 1/2 day (depending on local conditions) | |||
| Dimensions (WxHxD) | 715 x 1538 x 680 mm | |||
| Total weight | 185 kg | 290 kg | ||
Battery storage
| salidomo® 9 | salidomo® 18 | |||
| Battery type | Salt battery (molten salt or ZEBRA cell) | |||
| Chemical name | NaNiCl2 (sodium nickel chloride) | |||
| Expected life at 80 % DoD | 15 years / > 8500 shallow cycles | |||
| Nominal storage size | 9.4 kWh | 18.8 kWh | ||
| Usable storage | approx. 8 kWh | approx. 16 kWh | ||
| Charging power | ≤ 40 A (≤ 2 kW) | ≤ 80 A (≤ 4 kW) | ||
| Continuous power discharge | ≤ 150 A (6.5 kVA) Battery limited | ≤ 220 A (9 kVA) Inverter limited | ||
| Maximum C rate (charge / discharge) | 0.25 C / 0.5 C | |||
| Nominal battery voltage | 48 V | |||
| Battery efficiency (standard cycle) | 90 % | |||
Inverter
| salidomo® 9 | salidomo® 18 | |||
| Nominal power (Victron, adapted to salt battery) | 3 x 3 kVA / 400 V | |||
| Overload capacity (max. 5 sec.) of the max. discharge power | 18 kVA | |||
| Galvanic isolation (DC from AC) | yes | |||
| Inverter safety in PV systems | DIN EN 62109 certified | |||
| Energy management | Victron ESS adapted to the salt battery by innovenergy® | |||
Further functions
| Self-consumption optimisation | integrated and configurable |
| Breaking demand peaks (peak shaving) | integrated and configurable |
| Automatic stand-by operation | with unloaded inverters |
| Visualisation, data analysis, energy statistics | Web platform plus app for iOS + Android |
| Battery monitoring | Remote monitoring of each individual battery in real time |
Definition of emergency power
Emergency power
In the event of a grid failure, the system automatically switches over in less than 20 milliseconds and continues to function autonomously. The photovoltaic power is no longer available. However, the battery system can continue to be used until it is completely discharged.
Uninterruptible Power Supply (UPS)
UPS means that in the event of a power failure, the power supply continues to be guaranteed without interruption. Depending on the class, the switchover to emergency power takes place in a few milliseconds. Such systems are necessary in sensitive systems such as hospitals or server parks – in less sensitive systems, an interruption of several seconds is often not relevant. The interruption of 20 milliseconds during the switchover to emergency power at innovenergy® does not correspond to a real UPS system.
Off-grid operation
With an off-grid battery storage system, the photovoltaic power is still fully or partially available in the event of a grid failure. The battery can continue to be charged. Surpluses can also be consumed in the off-grid system. This extends the duration of self-sufficiency. Here, too, the system switches automatically in less than 20 milliseconds.
Emergency power supply
The salidomo® is optionally available as an off-grid capable salt battery storage system. In this case, the system automatically switches to island operation in less than 20 milliseconds in the event of a mains failure and continues to function autonomously. In order for the battery to continue to use solar power without a grid, a DC/DC solar charge controller from Victron would have to be used.
| Mains independence | asymmetrical 3-phase operation |
| Recharging by PV in off-grid operation | DC -> DC: Victron MPPT |
| Separate emergency circuit | ≤ 9 kVA freely definable |
| Emergency power switchover | automatic (in under 20 milliseconds) |
Intelligent control
- Potential-free contact for switching consumers on and off (charging station, heat pump, etc.)
- Time control for recharging the battery from the mains (calibration 100 % SOC)
- Lifetime-optimised operation of the battery (power limits)
Recycling
100 % of the discarded salt batteries are returned to the raw material cycle. In Switzerland, this recycling is ensured by INOBAT. Different recycling regulations apply in each country and advance disposal fees are charged accordingly. Please ask your sales partners in the respective country.
Subsidies
KFW subsidy in Germany is available with a 10-year current value guarantee.
Warranty
Provided that the installation and operating conditions are complied with, the salt battery is covered directly by the manufacturer with a time-value guarantee of 10 years. The battery inverters are covered by a 5-year warranty. Everything else is covered by a standard 2-year warranty. The warranty is an device warranty. Travel costs and working hours will be charged separately in the event of replacement or faults, unless you have subscribed to a service contract for the relevant year.
Norms
EMC Directive 2014/30/EU: EN 61000-3-2:2014 | EN 61000-3-11:2017 | EN 61000-3-12:2011 | EN 61000-6-1:2007 | EN 61000-6-2:2019 | EN 61000-6-3:2007/A1:2011/C11:2012 | EN 61000-6-4:2019 | EN 55014-1:2017 | EN 55014-2:2015 | EN_IEC 62040-2:2018
Low Voltage Directive 2014/35/EU: EN-IEC 60335-1:2012/A11:2014/A13:2017 | EN-IEC 60335-2-29:2004/A2:2010/A11:2018 | EN-IEC 62233:2008 | EN-IEC 62368-1:2014/A11:2017 | EN-IEC 62109-1:2010 | EN-IEC 62109-2:2011 | EN-IEC 62040-1:2020 | EN-IEC 50438:2014 | EN 62485-1:2018 | EN 62485-2:2018 | UL 1973 2013 Ed.1 | VDE-AR-N 4105:2018-11 | VDE-0126-1-1:2006/A1:2012 | VDE V 0124-100:2019-04 | G99 1-6:09.03.2020 | G98 1-3:03/2019 | EN 50549-1:2019 | EN-IEC 62116:2014 | EN 61439-1:2012 | EN 61439-2:2012 | EN-IEC 62984-1:2017 | EN-IEC 62984-3-1:2017 | EN-IEC 62984-3-2:2017
RoHS (2011/65/EU and 2015/863/EU): EN 63000:2019
Extension options
If the storage demand increases, another battery can be added at any time (even years later) without any problems. The storage capacity then increases by 9 kWh to 18 kWh total storage capacity. Both batteries can be operated with the three Victon AC inverters.
Further information can be found in the detailed circuit diagram and in the connection example without emergency power or in the connection example with emergency power.
Advantages of the salt battery
The salt batteries of the innovenergy® storage solutions are made of harmless materials: 32 % common salt, 22 % nickel, 22 % iron, 20 % ceramic.
The recycling of the salt battery has been standardised for 15 years. The metals are melted down and returned to the metal industry. The battery is manufactured 100% in Switzerland according to Swiss environmental and labour standards.
The salt battery is absolutely safe - the rooms do not need any fire protection or fire warning devices as the battery is neither flammable nor can it explode. It can also be operated in very cold and very warm rooms (-20° to +60° C) without ventilation or air conditioning. The outside temperature does not affect the storage capacity or the service life.
The battery survives a total discharge without damage. The salt battery has a service life of at least 15 years (10-year guarantee) and is maintenance-free.
The salt battery is extremely robust and is used by the thousands in the telecommunications industry. In industry, it is considered a cheap and safe electricity storage technology in the long term. With innovenergy®, this technology is now also available for domestic use and for businesses.
You can find more information under Salt Technology.
You want to know what the whole thing costs now?
To do this, click on the "Start Request" button on the left and find your sales partner near you. He will be happy to advise you!
